|
Product Description
The FAD-4 A/D Converter is a very accurate, versatile, general purpose instrument. It is designed to connect 1 to 4 load cells. It incorporates high performance A/D conversion including digital calibration with individual digital corner adjustment.
The instrument is approved by Weights & Measures Authorities for use in Accuracy Class III applications with up to 10 000 increments (e) according to OIML R76 with Type FDT-A/B Display Terminal.
All communication via a bi-directional serial interface. This allows very easy connection to any PC, PLC or other device with network capability.
Standard weighing function are available: Auto zero maintenance, motion detection, auto-zero at power-up, zero, tare, gross, test.
The unique calibration and corner adjustment allows the use of dead weights to be placed on the scale. But in cases where calibration with dead weight is difficult (high capacity silos or hoppers) the calibration data from the individual load cells can be used.
The stainless steel housing offers the ideal solution for industrial applications.
A display unit with 6 digits LED red, 14 mm including tactile 6 key keypad is available for remote operation. See data sheet FDT-A / -B.
Key Features
- Independent connection for up to 4 load cells
- EU Type approved for 10 000 increments with Type FDT-A/B Display Terminal
- Single or dual scale interval
- Internal resolution 550 000 counts
- Full digital corner calibration by test weights or load cell calibration data in mV/V
- Analogue and digital fi ltering
- EEPROM calibration data storage
- Serial communication RS485A for direct connection to computer or other devices
- Multidrop communication capability
- Conversion up to 80 times per second
- Set points (2x) available
- Protection IP65
Option
Available Accessories
- Mains adapter 230 V AC / 9 V DC, 500 mA
- RS485A to RS232C converter
|
Expect optimal measurement and process control from Flintec's digitising solutions for both static and dynamic measurement.
|
Contact form >>
|
| 
