Product Description
The type 56-02 dummy supports have same height and can be combined with corresponding capacity of weigh modules type 55-20, 55-01-10 and 55-01-07C/D rocker system.
The dummy supports are typically used in scale systems for level control in tanks. They replace two of the weigh modules in tanks on 3 or 4 legs and give a very cost effective scale solution.
The supports are dimensioned to take side forces in any horizontal direction up to 100% of maximum capacity.
Lift off forces are safe to 50% for the 7.5/15/22.5 t unit and to 100% for the 30/40 t unit.
If foundation plates and tank feet are prepared also with mounting holes for the weigh module, the scale can later easily be upgraded to a high accuracy load cell system by replacing the dummy supports with weigh modules.
Material: Mild steel, zinc plated.
Key Features
- Capacities 7.5 t to 40 t
- Easy installation by bolting or welding
- Tolerates large angular errors for tank foot and foundation plate
- Allows thermal expansion/contraction
- Very rugged design
Available Accessory
- Welding plates top and/or bottom
|
Flintec's ruggedised weighing modules are tough enough to withstand earthquakes. |
Contact form >> | | 
