Product Description
The type 56-01 dummy supports have the same height as type 52-13 weigh modules (56-01-13 version) respective type 52-18 weigh modules (56-01-18 version) and can be combined at corresponding capacities.
The dummy supports are typically used in scale systems for level control in tanks. They replace two of the weigh modules in tanks on 3 or 4 legs and give a very cost effective scale solution.
The supports are dimensioned to take side forces in any horizontal direction as well as lift off forces, up to 100% of maximum capacity. The weigh module can therefore be of simplest free sliding type and fitted with lift off protection only if required.
If foundation plates and tank feet are prepared also with mounting holes for the weigh module, the scale can later easily be upgraded to a high accuracy load cell system by replacing the dummy supports with weigh modules.
Material: Mild steel, zinc plated.
Key Features
- Capacities up to 100 kN
- Easy installation by bolting or welding
- Tolerates large angular errors for tank foot and foundation plate
- Allows thermal expansion/contraction
- Very rugged design
Available Accessory
- Welding plates top and /or bottom
|
Flintec's ruggedised weighing modules are tough enough to withstand earthquakes.
|
Contact form >>
|
| 
Data Sheet
CAD Drawings
