Product Description
The type 52-18 Weigh Modules are available in 2 basic versions:
52-18RS employing the Rocking System, and
52-18SS which employs the Sliding System.
Both versions have identical outer dimensions and mounting principles, but have somewhat different features. Some features are overlapping and which weigh module is the optimal choice depends on the application.
The new 52-18RS-C is very cost effective and the first choice for static tank and hopper applications. All modules used in a scale are identical and can be freely oriented in any direction. However, it is not suitable for tanks with agitators, which might cause the scale to oscillate, as it is standing on rockers.
The 52-18RS, with its Rocking Pin Load Introduction, is the natural choice when very high resolution is required, whereas the 52-18SS, with Sliding Pin Load Introduction, is the choice when very large expansions/contractions due to temperature or other reasons are expected.
Delivered preassembled and centred with Aligning Plate for easy installation. Especially designed for SB4, SB5, SB14 and SLB load cells. Material: steel, zinc plated; alternatively stainless steel.
Key Features
- Universal system
- Capacity range up to 10 t
- Blind hole load introduction
- Low profile
- Easy to install
- No check links needed
- W&M certified for 3 000 intervals
Options
- Overload protection
- Lift off protection
- Welding Plate
- Bolting Plate
Available Accessories
- Welding Fixture
- Jacking Device
|
Flintec's ruggedised weighing modules are tough enough to withstand earthquakes.
|
Contact form >>
|
| 
Data Sheet
CAD Drawings
