|
Product Description
MCS-64 is a multi channel solution for static and dynamic weighing processes which require communication with industrial bus systems. The basic weighing module is the LDM 88.1 which has 4 digital inputs (DI) and digital outputs (DO).
For bus connections, gateways such as Profibus, CANbus and Ethernet are available. The gateway can communicate via the internal system bus (RS485), with up to 64 LDM 88.1 weighing modules.
All standard weighing functions are available on the LDM 88.1.
In addition 3 special fi rmware versions are available:
- "Automatic Weighing Controller" for dynamic weighing in check weighers or multi head scales.
- "Fluid Filling Controller" for dosing processes of fluids, pellets or powder.
- "Loss in Weight" for charge dosing with actual flow, trend and totalizing.
The 4 DI's can read the current state of the weighing process.
The 4 DO's can control valves, throttles (shut off flap) etc. directly.
Within the LDM 88.1 firmware there are special routines to optimise the weighing and filling processes.
Key Features
- Multi channel system for up to 64 channels
- Profibus-Gateway
- CANopen-Gateway
- Ethernet-Gateway
- Calibration with weight or mV/V
- Max. conversion rate 2400 per second
- Digital filters, programmable
- Linearity better than 0.002 %
- 4 Logic inputs per channel (opto-isolated)
- 4 Logic outputs per channel (opto-isolated)
- Get / Set image function
- Firmware download
Options
Available Accessory
- Setup software running under MS Windows
|
Expect optimal measurement and process control from Flintec's digitising solutions for both static and dynamic measurement. |
Contact form >> | | 
